Journal of the European Optical Society - Rapid publications, Vol 10 (2015)
Optical path difference evaluation of laser-soldered optical components
Abstract
© The Authors. All rights reserved. [DOI: 10.2971/jeos.2015.15059]
Citation Details
Cite this article
References
T. Sure, J. Heil, and J. Wesner, ”Microscope objective production: on the way from the micrometer scale to the nanometer scale,” Proc. SPIE 5180, 283–292 (2004).
J. Heil, T. Bauer, W. Mueller, T. Sure, and J. Wesner, ”New tools for high-precision positioning of optical elements in high-NA microscope objectives,” Proc. SPIE 5252, 431–442 (2004).
E. Grossman, and I. Gouzman, ”Space environment effects on polymers in low earth orbit,” Nucl. Instrum. Meth. B 208, 48–57 (2003).
L. Reichmann, O. Falkenstörfer, U. Krüger, T. Schletterer, M. Bening, and M. Bornschein, ”Low-stress glue-free mounting technology for optical elements,” Proc. SPIE 7100, 71001B-1–71001B-7 (2008).
H. Holderer, and J. Christ, ”UV-resistant jointing technique for lenses and mounts,” US Patent 5991101 (1999).
U. Bingel, H. Holderer, and F. Zernike, ”Galvanoplastic optical mount,” EP Patent 0898189 (2005).
T. Takahashi, T. Okumura, E. Suzuki, T. Kojima, H. Suzuki, T. Tojo, and K. Machida, ”Lens-cementing technology used in optical systems of deep-ultraviolet wavelength regions,” J. Micro-Nanolith. MEM 6, 043010 (2007).
C. Rothhardt, J. Rothhardt, A. Klenke, T. Peschel, R. Eberhardt, J. Limpert, and A. Tünnermann, ”BBO-sapphire sandwich structure for frequency conversion of high power lasers,” Opt. Mater. Express 4, 1092–1103 (2014).
S. Sinha, K. E. Urbanek, A. Krzywicki, and R. L. Byer, ”Investigation of the suitability of silicate bonding for facet termination in active fiber devices,” Opt. Express 15, 13003–13022 (2007).
T. Tamaki, W.Watanabe, and K. Itoh, ”Laser micro-welding of transparent materials by a localized heat accumulation effect using a femtosecond fiber laser at 1558 nm,” Opt. Express 14, 10460–10468 (2006).
S. Richter, S. Döring, A. Tünnermann, and S. Nolte, ”Bonding of glass with femtosecond laser pulses at high repetition rates,” Appl. Phys. A-Mater. 103, 257–261 (2011).
K. Egashira, and M. Kobayashi, ”Analysis of thermal conditions in CO2 laser splicing of optical fibers,” Appl. Optics 16, 2743–2746 (1977).
K. Egashira, and M. Kobayashi, ”Optical fiber splicing with a lowpower CO2 laser,” Appl. Optics 16, 1636–1638 (1977).
M. Zervas, and C. Codemard, ”High power fiber lasers: a review,” IEEE J. Quantum Elect. 20, 219–241 (2014).
H. Faidel, B. Gronloh, M. Winzen, E. Liermann, D. Esser, V. Morasch, J. Luttmann, et al., ”Passive alignment and soldering technique for optical components,” Proc. SPIE 8235, 8235–8240 (2012).
L. Stauffer, A. Würsch, B. Gächter, K. Siercks, I. Verettas, S. Rossopoulos, and R. Clavel, ”A surface-mounted device assembly technique for small optics based on laser reflow soldering,” Opt. Laser. Eng. 43, 365–372 (2005).
H. Banse, E. Beckert, R. Eberhardt, W. Stöckl, and J. Vogel, ”Laser beam soldering– a new assembly technology for micro optical systems,” Microsyst. Technol. 11, 186–193 (2005).
E. Beckert, T. Burkhardt, M. Hornaff, A. Kamm, I. Scheidig, C. Stiehl, R. Eberhardt, et al., ”Submicron accuracy optimization for laser beam soldering processes,” Proc. SPIE 7585, 758505 (2010).
J. Ojeda, E. Beckert, T. Burkhardt, M. Hornaff, and A. Kamm, ”Experimental evaluation of the polarization crosstalk when soldering a polarization-maintaining fiber into a v-grooved substrate,” IEEE T. Compon. Pack T. 3, 543–548 (2013).
P. Ribes, T. Burkhardt, M. Hornaff, S. Kousar, D. Burkhardt, E. Beckert, M. Gilaberte, et al., ”Solderjet bumping technique used to manufacture a compact and robust green solid-state laser,” Proc. SPIE 9520, 95200 (2015).
T. Burkhardt, M. Hornaff, A. Kamm, D. Burkhardt, E. Schmidt, E. Beckert, R. Eberhardt, et al., ”Low-strain laser-based solder joining of mounted lenses,” Proc. SPIE 9574, 95740M (2015).
K. Kim, S. Huh, and K. Suganuma, ”Effects of cooling speed on microstructure and tensile properties of Sn–Ag–Cu alloys,” Mat. Sci. Eng. A-Struct 333, 106–114 (2002).
P. Lall, S. Shantaram, J. Suhling, and D. Locker, ”Effect of high strain-rate on mechanical properties of SAC105 and SAC305 leadfree alloys,” in Proceedings to the 62nd Electronic Components and Technology Conference (ECTC), 1312–1326 (IEEE, San Diego, 2012).
B. W. Smith, ”Optical projection lithography,” in Nanolithography: the art of fabricating nanoelectronic and nanophotonic devices and systems, M. Feldman, ed., 1–41 (Woodhead Publishing, Cambridge, 2014).