Journal of the European Optical Society - Rapid publications, Vol 5 (2010)

Fabrication of subwavelength structured surfaces via electrospray deposition of nanobeads

M. Heilmann, M. Pfeffer, Y. Yamagata, S.-Y. Morita

Abstract


The usability of electrospray deposition (ESD) to form antireflection structured (ARS) surfaces was studied experimentally. Subwavelength structured (SWS) surfaces were produced by depositing nanobeads with diameters of 50 nm onto glass substrates covered with an ITO-Film. The reflectance from the substrates could be decreased about nearly 3% with an onesided ARS surface.

© The Authors. All rights reserved. [DOI: 10.2971/jeos.2010.10023]

Full Text: PDF

Citation Details


Cite this article

References


A. Gombert, W. Glaubitt, K. Rose, J. Dreibholz, B. Bläsi, A. Heinzel, D. Sporn, W. Döll, and V. Wittwer, "Subwavelength-structured surfaces on glass" Thin Solid Films 351, 73-78 (1999).

A. Jaworek, "Electrospray droplet sources for thin film deposition" J. Mater. S. 42, 266-297 (2007).

D. H. Raguin, "Analysis of antireflection-structured surfaces with continuous one-dimensional surface profiles" Appl. Opt. 32, 2582- 2598 (1993).

W. H. Southwell, "Pyramid-array surface-relief structures producing antireflection index matching on optical surfaces" J. Opt. Soc. Am. A 8, 549-553 (1991).

C. Heine, "Submicrometer gratings for solar energy applications" Appl. Opt. 34, 2476-2482 (1995).

E. B. Grann, "Optimal design for antireflection tapered twodimensional subwavelength grating structures" J. Opt. Soc. Am. A 12, 333-339 (1995).

M. G. Moharam, "Formulation for stable and efficient implementation of the rigorous coupled-wave analysis of binary gratings" J. Opt. Soc. Am. A 12, 1068-1076 (1995).

S. J. Gaskell, "Electrospray: principles and practice" J. Mass Spectrom. 32, 677-688 (1997).

I. B. Rietveld, "Electrospray deposition, model, and experiment: Toward general control of film morphology" J. Phys. Chem. B 110, 23351-23364 (2006).