Photopolymers: beyond the standard approach to photosensitisation

I. G. Naydenova; S. Martin; V. Toal

doi:10.2971/jeos.2009.09042

Journal of the European Optical Society - Rapid publications, Vol 4 (2009)

Photopolymers: beyond the standard approach to photosensitisation

I. G. Naydenova, S. Martin, V. Toal

Abstract

A photopolymerizable material for use in the visible normally consists of a dye sensitizer, a free radical generator, monomer/monomers and, optionally, a binder, and is prepared usually as a dry or liquid film. Upon illumination with light of appropriate wavelength, a photopolymerisation reaction is triggered, leading to a change in the film’s refractive index. Because the presence of the dye is essential, the film is usually made sensitive to light during its preparation. Here we separate the film preparation and the sensitisation processes. In this way the photopolymerisation process can be used to detect dye labelled analytes, providing an alternative to fluorescence detection methods that offers visual, easy to interpret information. Our approach also allows for a precise control of the spatial location of the photoinduced refractive index changes that can be utilised for holography, lithography and photonic device fabrication.

Full Text: PDF

Citation Details

Cite this article

References

C. H. Bamford, and M. J. S. Dewar, "Photosensitisation by Vat dyes" Nature 163, 214 (1949).

G. Oster, "Dye sensitised photopolymerisation" Nature 173, 300- 301 (1954).

I. Naydenova, R. Jallapuram, V. Toal, and S. Martin, "A visual indication of environmental humidity using a colour changing hologram recorded in a self-developing photopolymer" Appl. Phys. Lett. 92, 031109 (2008).

A. J. Marshall, J. Blyth, C. Davidson, and C. R. Lowe, "pH-sensitive holographic sensors" Anal. Chem. 75, 4423-4431 (2003).

"Holographic Data Storage" in Springer Series in Optical Sciences H. J. Coufal, D. Psaltis, and G. T. Sincerbox, eds., 76, (Springer- Verlag, 2000).

http://www.inphase-technologies.com/

http://www.aprilisinc.com/

S. Guntaka, V. Toal, and S. Martin, "Holographically recorded photopolymer diffractive optical element for holographic and electronic speckle-pattern interferometry" Appl. Opt. 41, 7475-7479 (2002).

S. C. Lai, "Security holograms using an encoded reference wave" Opt. Eng. 35, 2470-2472 (1996).

D. E. Lucchetta, L. Criante, and F. J. Simoni, "Optical characterization of polymer dispersed liquid crystals for holographic recording" J. Appl. Phys. 93, 9669-9674 (2003).

J. P. Fouassier, X. Allonas, and D. Burget, "Photopolymerization reactions under visible lights: principle, mechanisms and examples of applications" Prog. Org. Coat. 47, 16-36 (2003).

T. J. Trout, J. J. Schmieg, W. Y. Gambogi, and A. M. Weber, "Optical photopolymers: design and applications" Adv. Mater. 10, 1219- 1224 (1998).

S. Martin, P. Leclere, Y. Renotte, V. Toal, and Y. Lion, "Characterisation of an acrylamide-based dry photopolymer holographic recording material" Opt. Eng. 33, 3942-3946 (1992).

S. Martin, C. A. Feely, and V. Toal, "Holographic recording characteristics of an acrylamide-based photopolymer" Appl. Opt. 36, 5757-5768 (1997).

I. Naydenova, R. Jallapuram, S. Martin, R. Howard, and V. Toal, "Investigation of the diffusion processes in a self-processing acrylamide-based photopolymer system" Appl. Opt. 43, 2900-2905 (2004).